After months of testing on a stationary refrigerated trailer (Reefer) supplied by a national grocery chain, the fuel improvements have been exceptional. A second Reefer has been delivered to dynaCERT in order to duplicate the testing process for even further confirmation of the effectiveness of the dynaCERT HydraGEN™ technology.
The test protocol measured hourly results at different temperature set points of the refrigeration unit to benchmark the engine’s fuel consumption and emission results under various conditions. This was conducted over many weeks to verify results.
The HydraGEN™ unit was then connected to the engine’s air intake and the testing followed the same protocol as the benchmark testing and recorded improved fuel consumption and emission results.
While testing continues, current results show fuel consumption reductions exceeding 20% at selected different temperature set points and as high as 28% when the Reefer engine was operating at a steady state. The current test also shows results of similar reductions in emissions as attained in the PIT testing of HG1 units (see Press Release of September 21, 2017 “Milestone Exceeded by dynaCERT’s HydraGEN™ Technology: Initial PIT Group Test Results Show Emission Reductions – NOx Reduced by 46.1%.”).
Testing has begun on the second Reefer trailer to replicate these results.
These results point dynaCERT’s new HG2 unit to a potential vast market for not only Reefers but also Class 2-5 fixed-body delivery trucks, city buses and average trucks in the European, Asian and India market place. The company has made significant progress in the development of the HG2 unit, which is approximately 25% of the size of the HG1 unit, thereby allowing for a broader range of applications for diesel engines with displacements of up to 10 litres.
dynaCERT (TSX.V-DYA) (OTC:DYFSF) is scheduled to occupy the approximately 8,000 sq.ft. lease expansion facility on October 1, 2016. The lease payments will commence on possession date. This facility is designed with a monthly capacity of 2,000 units per eight-hour shift for the assembly of the HydraGenTM units.The Company is working with the Government and Port support as well as specific consortium members to assist in the conversion of the current manufacturing facility to R&D and production of the next generation HydraGenTM units which will be designed for shipping, rail and large stationary power generation.
Third party testing of the HydraGenTM unit for Class 8 trucks has been completed and a 550 page document of valuable data has been received from the University of Ontario Institute of Technology where the tests were done for both fuel savings and carbon emission reductions. A formal report will be completed soon.
dynaCERT has entered into a formal strategic partnership with Lyte Energy Inc., located in Mississauga, Ontario to promote, market and distribute our HydraGen products globally. Lyte Energy is a Canadian company specializing in providing green energy solutions incorporating hydrogen generation, hydrogen storage and hydrogen fuel cell technologies.
dynaCERT reported that they faced certain challenges with the sophisticated sensors and electronic controls on newer trucks and communications with the initial 50 unit purchase order. They are now confident that, through a collaborative effort by their team of engineers, professional consultants and fleet owners, they have overcome these challenges via electronic programming of their new “Smart ECU” and are closely monitoring these trucks along with data collection to enable the company and third party to finish validation. Once completed, and with a minimum of 8% in fuel savings validated, the sales of these units will be completed along with purchase orders for an additional minimum pre-arranged percentage of their fleets.
dynaCERT is filing patents for their wholly owned Intellectual Property with their “Smart ECU” which is designed with “007” technology. If attempts to open or tamper with the sealed ECU, it will self-destruct to ensure the protection of what they believe to be their most valued IP.
dynaCERT is monitoring and testing the first new compact unit that was installed on a 2.0 liter turbo diesel import for emissions with the company’s recently updated and calibrated computerized emission testing equipment. This will be an ongoing process and monitored by computer generated read outs of O2, CO2, NO, NO, NO2, NOx, CxHy, and SO2.
Click on this link for the second interview that Jay Taylor conducted with Jim Payne, President & CEO of dynaCERT Inc. (TSX.V-DYA) (OTCBB-DYFSF):
You Tube: Jay Taylor Interview with Jim PayneAbout dynaCERT Inc.
dynaCERT Inc. manufactures, distributes, and installs Carbon Emission Reduction Technology for use with internal combustion engines. Our patent-pending technology creates hydrogen and oxygen on-demand through electrolysis and supplies these additives through the air intake to enhance combustion, resulting in lower carbon emissions and greater fuel efficiency. Our technology is currently in use with on-road applications. More information can be found at www.dynacert.com.
dynaCERT (TSX.V-DYA) (OTCBB-DYFSF) announced the following:
- The lease and build out of an 8,000 sq ft expansion for assembly of the HydraGen for the trucking industy, with a production capacity of 2,000 units/month based on an 8 hour shift
- In discussions for funding through both federal and provincial government grant and loan programs for new equipment and additional manpower for the new facility
- Current facility will be converted to R&D and production for shipping, rail and large stationary power generation products. There is a planned financing program regarding these emerging markets and are working with the Government and Port supports. With these new and ongoing government grant applications, dynaCERT has adopted to adhere to the Ontario Government requirements-validation process to ensure qualification under any of the Federal Government programs
- dynaCERT is working with several trucking firms in Ontario and has HydraGen units and data loggers installed on 2012-2016 transport trucks, collecting data to complete the new algorithms for the new Smart ECU
- dynaCERT’s engineers and scientists are working with the RMF Design & Manufacturing team of electronic engineers along with Diesel & Electronic Technicians who are consultants from two major OEM companies to finalize the electronic interface of the “Smart ECU” and filing patents on these. The technology of the new “Smart Ecu”, or brain, will resemble a smart phone where it is always learning and will:
- communicate with the onboard computer along with reading, collecting and storing data of fuel efficacy and emissions
- enable remote access by both dynaCERT and end users
- provide monitoring for Carbon Credits and GPS tracking
- Entered into a contractual agreement with a company representing dynaCERT’s product suite within the country of India with the intent to ship and sell products with the option to purchase a licensing agreement for manufacturing with an ongoing royalty commitment per unit. India represents about 1.5 million buses, 5 million trucks and numerous diesel power plants and has recently announced requirements to meet more stringent emission reductions.
- dynaCERT has partnered with Global Access Capital Corp to provide lease options for dynaCERT’s technology customers. Go to: www.globalaccesscapital.ca or www.dynacert.com for more information.
July 2, 2015 dynaCERT TSX.V-DYA announced that it closed the non-brokered private placement for 2,547,418 units at a price of $0.15 per Unit for an aggregate of $386.162.
Hydragen Units Manufacturing: Parts and raw materials for the HydraGen units have now arrived to dynaCERT’s faciltiies and manufacturing and assembly of the first 100 unit production run will be commencing next week.
Mr. Gonzalo Labbe has been appointed to dynaCERT’s advisory board. Mr. Labbe’s expertise is in operations management in the Transport, Oil & Gas and Retail/Service industries and mostly in South America. He has worked with Shell Company (Chile) as the Head of Order Management South America; with Cummins Engines Inc. (Columbia) as Regional Service Manager and is currently the General Manager of Enermek (and its sub Enermek Fuels), an energy sector enterprise he founded in 2010 that focuses on providing environmental solutions and energy savings in the Latin American market.
Canvest 2015 – The CEO and President as well as the Chair of the BOD were expositors at the Vancouver conference May 31 and June 1 and participated in important meetings with industry analysts, fund managers and researchers from diverse institutions from across Canada. Here is a link to an interview conducted at the conference: Jim Payne, President of dynaCERT Speaks with Nancy Massicotte of ABN Newswire
Caribbean Pilot Project: After concluding Phase I testing of the pilot project of the HydraGen technology with a stationary power generator in the Caribbean, the Caribbean Pilot Project Partner underwent Partner’s major management changes. Pilot project was put temporarily on hold; final review of all data along with conversations with new management is now underway with expectations of moving into the next phases starting in the fall of 2015.
(this is a synopsis of the news release – see www.dynacert.com for complete release)